Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Tin tức mới

Hổ trợ trực tuyến

nhuthamta

nhuthamta

Sản phẩm mới

Thống kê

Đang online 4
Hôm nay 4
Hôm qua 4
Trong tuần 67
Trong tháng 309
Tổng cộng 11,045

Wattlow ANSI Flange Immersion Heaters_WTS20140507380V30KW-REV 1_Wattlow Vietnam_ANS Vietnam

Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Xuất xứ: Wattlow
Mô tả:

WTS20140507380V30KW-REV 1
380 VAC 3Ph 30 Kw
4 Nps Nps Class 300 Carbon Steel Flange
(6) 0.43 inch Dia Alloy 800 Elements With A 38in Immersed Length
Non-Classified, Moisture Resistant Enclosure
To Fit in a 4 Nps Standard Schedule Carbon Steel Vessel
Vessel not included

Watlow flanged immersion heaters are easy to install and maintain. Designed for heating liquids and gases in tanks and pressure vessels, flanged immersion heaters are ideal for applications requiring higher kilowatts.
Watlow flanged immersion heaters are made with WATROD or FIREBAR tubular elements brazed or welded to a flange. Stock flange heaters are equipped with a general purpose  terminal enclosure.
Flanged immersion heaters, with FIREBAR elements, also answer the need for liquid immersion applications requiring high kilowatts in small tanks. The FIREBAR element's unique flat surface geometry packs more power in a smaller bundle, with lower watt density, making it especially well-suited for petroleum-based liquid heating applications.
 
Specifications:
 
 
Material
 
 
Maximum Operating Temperatures
 
 
Maximum Watt Densities
 
 
°F
 
 
°C
 
 
W/in2
 
W/cm2
Alloy 800 
1600
870
100
15.5
Stainless steel 
1200
650
100
15.5
Steel 
750
400
100
15.5
N/A 
350
175
100
15.5
·         A conventional round tubular 10-inch ANSI flange can be replaced by a 6-inch ANSI FIREBAR flange
·         Watt densities to 100 W/in² (15.5 W/cm²)
·         Wattages to three megawatts
·         UL® and CSA component recognition to 600VAC
·         Passivated 316 stainless steel sheath temperatures to 1200°F (650°C)
·         304 stainless steel sheath temperatures to 1200°F (650°C)
·         Steel sheath temperatures to 750°F (400°C)
·         FIREBAR flange heaters deliver more killowatts in smaller bundles
·         Alloy 800/840 sheath temperatures to 1600°F (870°C)
 Applications
·         Deionized water
·         Demineralized water
·         Clean water
·         Potable water
·         Process water
·         Industrial water rinse tanks
·         Vapor degreasers
·         Hydraulic oil, crude, asphalt
·         Lubricating oils at API specified watt densities
·         Air and gas flow
·         Chemical baths
·         Process air equipment
·         Boiler equipment
·         Freeze protection of any fluid
·         Anti-freeze (glycol) solutions
·         Paraffin
Features & Benefits:
 
Features

 
Benefits
 
ANSI and ANSI compatible 2, 2½, 3 thru 48 inch flanges
·         Provides appropriate heater size-to-application and fit
Element sheath and flange materials
·         Meets your application needs
Integral thermowells
·         Provides convenient temperature sensor insertion and replacement without draining the fluid being heated
Standard, general purpose terminal enclosure
·         Offers easy access to wiring
All units are inspected and/or tested
·         Ensures element-to-flange pressure seals do not leak
Drilled and tapped eyebolt holes or lift lugs for eye bolts on 10 inch and larger flange heaters
·         Facilitates lifting during installation
WATROD hairpins are repressed (recompacted)
·         Provides improved heater life, insulation resistance and heat transfer
Element support(s)
·         Provides proper element spacing to maximize heater performance and life

WTS20140507380V30KW-REV 1
380 VAC 3Ph 30 Kw
4 Nps Nps Class 300 Carbon Steel Flange
(6) 0.43 inch Dia Alloy 800 Elements With A 38in Immersed Length
Non-Classified, Moisture Resistant Enclosure
To Fit in a 4 Nps Standard Schedule Carbon Steel Vessel
Vessel not included